Step 1 – First, using a metal tape measure, measure across the top of the window, the middle, and the bottom.

Step 2 – The narrowest measurement of the three is the measure we call the recess width. This will be the finished size for the width of the blind. Please note, the system will automatically apply 0.4mm to ensure there is room for the brackets and bracket covers when installed horizontally or vertically as described in the installation guide. If you want to install the brackets in a different way, please contact us.

Step 3 – Then, do the same for the drop — measuring from the top of the recess down to the bottom of the window sill. This will be the finished size for the height of the blind.

These will be the dimensions when placing the order on our website.

Things to note:

Check that your recess is deep enough to fit the blind into, also bearing in mind any obstructions such as window or handles.

Please note, the system will automatically apply 0.4mm to ensure there is room for the brackets and bracket covers when installed horizontally or vertically as described in the installation guide. If you want to install the brackets in a different way, please contact us.

The fabric width will always be narrower than the recess width, leaving a gap of approximately 2,5 cm on each side of the blind.

If in doubt, please contact us for guidance.

Please read our faqs page for general questions about the product.