Step 1 – First, using a metal tape measure, measure across the top of the window, the middle, and the bottom. 

Step 2 – Make a note of the smallest measurement. Deduct 2 centimetres from this measurement, this will be the finished width size that you enter on the site.

Step 3 – Then do the same steps as step 1 for the drop – measuring from the top of the recess down to the bottom of the window sill. Write down the smallest measurement. We recommend keeping a small roll of fabric at the bottom of the blind of at least 10cm, this helps with weight and stability. It will also make it easier to roll up and down.

For example if your window recess measurements are 90cm width and 120cm drop.
90cm – 2cm = Finished blind width is 88cm
120cm + 10cm = Finished blind height 130cm

All bespoke blinds are handmade by our production team and made to size on the order, we cannot make these deductions for you. Each blind is unique and due to the construction of the slats and weaving of the blinds, we can not guarantee hitting your measurements 100%. There is an error margin of up to 0.5cm.

Please read our faqs page for general questions about the product.

If in doubt, please contact us for guidance.